ReMoni supportcenter

Search for answers to your questions by entering keywords below, or look through our supportcenter.

I have an error, how do I find out what that error is?


On the gateway there is two light diodes, one red and one green. These diodes can help you determine what the error is.

An  or  icon indicates that the LED is off, an  or  icon indicates that the LED is on and an  or  indicates that the LED flashes.

 

 

 

Errorcode

Description

101

Everything works.

102

There is no connection to the internet, but the Accesspoint works.

103

There is an error between the Raspberry Pi and the Accesspoint or the Accesspoint is not connected. There is however connection to the internet.

104

There is an error between the Raspberry Pi and the Accesspoint or the Accesspoint is not connected, plus there is no connection to the internet.

105

There is a power failure.

106

The SD-card is not inserted to the Raspberry Pi


Possible solutions to the errors

Errorcode

Solution

102

WiFi: Check with a smartphone, tablet or PC if a WiFi network with SSID “ReMoni GateWay” is visible. If it is visible follow the instructions “GateWay with WiFi”. If it is not visible, verify that the router your gateway is connected to, has got internet.

Ethernet: Verify that the ethernet cable is correctly connected to the gateway. Only the yellow LED on the ethernet connector should flash if there is connection. If not, try with another cable.

USB dongle: The light on the dongle should show a constant blue light. If there is no blue light, verify that the settings on the sim card is correct and there is data.

All: Restart the gateway by turning off the power, wait 20 seconds and turn it back on again.

103

Verify that the cable between the Raspberry Pi and the Accesspoint is correctly connected.

Try with a different cable.

104

Check the solutions for error codes 102 and 103.

105

Verify that the power is turned on and inserted correctly.

106

Verify that the SD-card is correctly inserted or try with a different SD-card.