1. Clamp a PowerMoniSpot on a cable connected to the unit you wish to monitor.
Note that the load profile is proportional to the current flow in the cable.
If it is a multiple-phased cable the load must be balanced across all phases.
In this guide, we're using the unit "aircondition" as an example.
2. Go to recalc.remoni.com.
3. Select "Units" in the menu and choose the unit you want to monitor on the list as seen below. Make sure that the sensor ID matches the PowerMoniSpot's ID. Click on the arrow next to "View" and select “Edit” in the drop-down menu.
4. In the top, select "Data."
5. Now the uncalibrated load profile is visible.